DCN - WL8200-X10
DCN - Indoor Access Points
DCN new generation wifi6 indoor AP, tri-band and total 14 spatial streams , IEEE 802.11a/b/g/n/ac/ax supported (2.4GHz 4*4, first 5GHz 8*8 and second 5GHz 2*2, fat/fit, default no power adapter), could be managed by DCN AP controller
DCN- Yunke China Information Technology Limited
Yunke China Information Technology Limited, as subsidiary of Digital China (Parent company) Group (Stock code: SZ000034), is a leading data communications equipment and solution provider. Deriving from Lenovo, DCN was launched into the network market in 1997 with company philosophy of “Client-oriented, Technology-driven and Service-preference”.
DCN focuses on data communication field with full product lines, including Switch, Wireless, Router, Security firewall and multi-core edge, storage and Cloud services. With continues invest on R&D, DCN is the leading IPv6 solution provider, the first Chinese company won IPv6 Ready Gold certificate and first manufacturer won OpenFlow v1.3 Certificate.
DCN provides product and solution to 60+ countries worldwide, and have established represent and service center at CIS, Europe, Asia, North America, South America and Middle East regions. DCN serves clients successfully from Education, Government, Operators, ISP, Hospitality, and SMB.
Based on independent development and sustainable innovation, DCN is continuous to provide network solution with intelligent, reliable and integrated network products and quality service for the clients.
Product Overview
WL8200-X10 - Highlights
Highlights
Industry-leading innovative design of tri-band, 14 spatial streams
Traditional wireless APs usually use 2.4GHz and 5GHz dual-band solutions. The WL8200-X10 product innovatively adopts a tri-band design. The whole AP supports 3 radio frequency modules to work at the same time, with an access rate of up to 6.82Gbps, and one radio frequency is fixed for 2.4G working mode, the other two radios are in 5G working mode. Adopt the latest MU-MIMO technology (multi-user input and output), OFDMA technology (orthogonal frequency division multiple access), spatial multiplexing technology, TWT technology (target wake-up time) and other advanced wireless technologies, the data transmission breaks through the traditional wireless network serial communication mechanism. The utilization rate of wireless spectrum resources has been doubled, and the number of effective access users has been greatly increased, effectively reducing the deployment cost of wireless network and increasing the user experience in high density scene.
Flexible installation
WL8200-X10 supports wall mounting, ceiling mounting, T-keel mounting, desktop mounting, you can deploy it almost everywhere that you want.
Triple band total 6.82Gbps for high density scene
WL8200-X10 support tri-band, accessing bandwidth can reach to 6.82Gbps, it could connect much more clients simultaneously, improve the overall throughput of the WIFI network greatly.
Dual mode fit & fat
WL8200-X10 can work in fit or fat mode and can flexibly switch between the fit mode and the fat mode according to network planning requirements.
Anti-thief
WL8200-X10 can work with Kensington technology to protect the investment of customer, which is very important to the specific customer.
Flexible power input
The power input of WL8200-X10 can be standard PoE or DC adapter, customer can make choice accordingly.
Product Specifications
WL8200-X10 Hardware Specifications
| Item | WL8200-X10 |
|---|---|
| Dimensions (L*W*H) (mm) | 215 × 215 × 45 |
| Physical port | 2 x 10/100/1000/2500Mbps ethernet ports 1 x BLE module |
| Console port (RJ-45) | 1 |
| USB 2.0 port | 1 |
| Power supply | 802.3bt PoE and External power adapter (Input: 100 ~ 240V AC, Output: 12 V DC) |
| Maximum power consumption | <30W |
| RF port | Built-in 2.4 GHz 4 dBi antenna and 5 GHz 5 dBi antenna |
| Working frequency band | 802.11b/g/n/ax: 2.4 GHz to 2.483 GHz |
|
802.11a/n/ac/ac wave 2/ax: 5.150GHz to 5.250GHz 5.250GHz to 5.350GHz 5.725GHz to 5.850GHz |
|
| Modulation technology |
11b: DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g: OFDM:64QAM@48/54Mbps, 16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM 11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM |
| Transmit power | 2.4G: 23dBm (Per Chain) 5G: 23dBm (Per Chain) (Note: final output power comply to deployment regulation might be different in different countries) |
| Power adjustment granularity | 1 dBm |
| Working/Storage temperature | 0°C to +50°C / -40°C to +70°C |
| Working/Storage RH | 5% to 95% (non-condensing) |
| Protection level | IP41 |
Software Specifications
WL8200-X10 Software Specifications
| Category | Feature | WL8200-X10 |
|---|---|---|
| WLAN | Product positioning | Indoor tri-band Wi-Fi6 AP |
| Working frequency band | 1st band: 2.4 GHz, 4×4 MIMO 2nd band: 5GHz, 8×8 MIMO 3rd band: 5GHz, 2×2 MIMO |
|
| Bandwidth performance | Total 6.82Gbps; 1st band: 2.4 GHz, 1.15Gbps 2nd band: 5GHz, 4.8Gbps 3rd band: 5GHz, 867Mbps |
|
| Virtual AP (BSSID) | 48 | |
| Concurrent user | 1000+ | |
| Number of spatial streams | 1st band: 2.4 GHz, 4 spatial streams 2nd band: 5GHz, 8 spatial streams 3rd band: 5GHz, 2 spatial streams |
|
| Dynamic channel adjustment (DCA) | Yes | |
| Transmit power control (TPC) | Yes | |
| Blind area detection and repair | Yes | |
| SSID hiding | Yes | |
| RTS/CTS | Yes | |
| RF environment scanning | Yes | |
| Hybrid access | Yes | |
| Restriction on the number of access users | Yes | |
| Link integrity check | Yes | |
| Accessing control of terminals based on signal strength | Yes | |
| Forcing terminals to roam based on signal strength | Yes | |
| Intelligent control of terminals based on airtime fairness | Yes | |
| High-density application optimization | Yes | |
| 802.11ax | Space streams | 2.4GHz: 4, 5GHz: 8 |
| Frequency band | 2.4GHz + 5GHz | |
| 80 MHz bundling | Yes | |
| Frame aggregation (A-MPDU) | Yes | |
| Frame aggregation (A-MSDU) | Yes | |
| Maximum likelihood demodulation (MLD) | Yes | |
| Transmit beamforming (TxBF) | Yes | |
| Maximum ratio combining (MRC) | Yes | |
| Space-time block coding (STBC) | Yes | |
| Low-density parity-check code (LDPC) | Yes | |
| Security | Encryption | 64/128 WEP, TKIP, and CCMP encryption |
| 802.11i | Yes | |
| Portal authentication | Yes | |
| WAPI | Yes | |
| MAC address authentication | Yes | |
| LDAP authentication | Yes | |
| PEAP authentication | Yes | |
| WIDS/WIPS | Yes | |
| Protection against DoS attacks | Anti-DoS for wireless management packets | |
| Forwarding security | Frame filtering, white list, static blacklist, and dynamic blacklist | |
| User isolation | AP L2 forwarding suppression isolation between client |
|
| Periodic SSID enabling and disabling | Yes | |
| Access control of free resources | Yes | |
| Wireless SAVI | Yes | |
| ACL | Access control of various data packets such as MAC, IPv4, and IPv6 packets | |
| Secure access control of APs | Secure access control of APs, such as MAC authentication, password authentication, or digital certificate authentication between an AP and an AC | |
| 802.11W | Yes, encryption of management frames | |
| Forwarding | IP address setting | Static IP address configuration or dynamic DHCP address allocation |
| IPv6 forwarding | Yes | |
| IPv6 portal | Yes | |
| Local forwarding | Yes | |
| Multicast | GMP snooping | |
| Roaming | Yes | |
| AP switching reference | Signal strength, bit error rate, RSSI, S/N, whether neighboring APs are normally operating, etc. | |
| WDS | Yes | |
| QoS | WMM | Yes |
| Priority mapping | Ethernet port 802.1P identification and marking Mapping from wireless priorities to wired priorities |
|
| QoS policy mapping | Mapping of different SSIDs/VLANs to different QoS policies Mapping of data streams that match with different packet fields to different QoS policies |
|
| L2-L4 packet filtering and flow classification | Yes: MAC, IPv4, and IPv6 packets | |
| Load balancing | Load balancing based on the number of users Load balancing based on user traffic Load balancing based on frequency bands |
|
| Bandwidth limit | Bandwidth limit based on APs Bandwidth limit based on SSIDs Bandwidth limit based on terminals Bandwidth limit based on specific data streams |
|
| Call admission control (CAC) | CAC based on the number of users | |
| Power saving mode | Yes | |
| Automatic emergency mechanism of APs | Yes | |
| Intelligent identification of terminals | Yes | |
| Multicast enhancement | Multicast to unicast | |
| Management | Network management | Centralized management through an AC; both fit and fat modes |
| Mesh networking | Through control AP to manage the RE AP | |
| Maintenance mode | Both local and remote maintenance | |
| Log function | Local logs, Syslog, and log file export | |
| Alarm | Yes | |
| Fault detection | Yes | |
| Statistics | Yes | |
| Switching between the fat and fit modes | An AP working in fit mode can switch to the fat mode through a wireless AC; An AP working in fat mode can switch to the fit mode through a local control port or Telnet. | |
| Remote probe analysis | Yes | |
| Watchdog | Yes | |
| Value added service | Value added marketing | Support various apps based on intelligent terminals, advertising push based on location, personalized push of portals |
| Value added authentication | WeChat, SMS, QR code | |
| Passenger flow analysis | Yes | Yes |
Typical Application
Order Information
Order Information
| Product Model | Description |
|---|---|
| WL8200-X10 | DCN new generation Wi-Fi6 indoor AP, tri-band and total 14 spatial streams, 802.11a/b/g/n/ac/ax supported (2.4GHz 4*4, first 5GHz 8*8 and second 5GHz 2*2), fat/fit, default no power adapter, could be managed by DCN AP controller. |